Plastic Pvc Window And Door
Basic Info
Model No.: LMPK-70
Product Description
Composition
The plastic steel profile is made of polyvinyl chloride (PVC) resin as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, ultraviolet absorbers, etc., and extruded into the formed material.
main feature
Plastic steel profiles are referred to as plastic steel, the main chemical component is PVC, so it is also called PVC profiles. It is a new type of building material that is widely used. Because of its physical properties such as rigidity, elasticity, corrosion resistance and aging resistance, it is usually used as a good substitute for non-ferrous metals such as copper, zinc and aluminum.
It is mainly used in the construction of houses, sliding doors and windows, guardrails, pipes and ceiling materials. It is also widely used in automobile engine protection boards through new process treatments. It is not only lightweight, but also has good toughness. Nature, sometimes referred to as alloy steel.
The reason why plastic steel profiles can be widely promoted and applied, and gradually replace wooden and aluminum doors and windows, and its unique advantages are inseparable. Plastic steel doors and windows have the following advantages over aluminum and wooden doors and windows:
1. The price is cheap, the price of plastic is much lower than that of aluminum with the same strength and longevity, and the advantage of the sharp increase in the price of metal has become more apparent.
2. Rich colors: the application of colored steel profiles adds a lot of color to the building. In the past, wooden doors and windows were used. In order to achieve harmony between the doors and windows and the appearance of the building, most of the paint was sprayed on the surface of the doors and windows. The paint was exposed to ultraviolet rays and easily aging and peeling off. It took a few years to be completely unrecognizable and was inconsistent with the life of the building. Later, colored aluminum doors and windows were invented, but they were expensive and could not afford the average consumer. The use of plastic doors and windows solves this problem, and the color film profiles can even make a false wood grain effect.
3. Durable: Adding reinforced steel into the profile cavity, the strength of the profile is greatly improved, and it has anti-seismic and wind-resistant effects. In addition, the multi-cavity structure of the profile, independent drainage cavity, so that water can not enter the enhanced steel cavity, to avoid corrosion of the steel, the service life of the door and window is improved. The addition of UV-resistant ingredients also improves the weatherability of steel profiles, and can be used safely even in tropical regions where UV light is strong.
4. Good thermal insulation performance: The thermal conductivity of plastic steel profiles is far less than that of aluminum profiles, and the design of multi-cavity structure has achieved the effect of heat insulation. Studies have shown that the room temperature of rooms of the same type in the summer using plastic steel doors and windows is 5-7 °C lower than that of aluminum doors and windows, and 8-15 °C higher in different parts of winter.
5. Sound insulation performance: Install the sound insulation performance of plastic steel doors and windows with good insulating glass. Sound insulation has become the main condition for selecting doors and windows, especially in downtown areas. The plastic Steel Door and window assembly adopts the welding process, and the closed multi-cavity structure has obvious effect on the noise shielding.
Superior performance of Lumei profile:
1. Upgrade of health;
2. Upgrade of energy conservation;
3. Upgrade of service life;
4. Upgrade of strength;
5. Upgrade of colors ,like pure white color.milk white color
6.Plastic material pvc profile with waterproof
The product process of our upvc profiles as below:
1.Blending mixed power
The material is top quality blending of plyvinyl chloride (PVC) and the stabilizer,lubricant,processing improver ,aging agent and colorant.
2.Cone screwed tube extrusion
The mixed power was compressed to shape by the cone screwed tune and the mould.
3.Finalizing the shape
The pariso is designed by the mould of designing in the vacuum cooling device.
4.Traction
Setting and regulating the speed of traction according to the speed of extrusion.
5.Cutting
The product is cut according to the required length and the protective film is pasted.
6.Inspecting
Each blade of our uPVC profiles strictly inspected .Your satisfaction is our biggest wish.
7.Packing
uPVC profiles is packed by plastic bag.It is suitable for long-distance sea delivery.
8.Loading Container
We have professional team and experienced experts,which can guarantee the cargo and the container be firm and safe.Our pvc profiles can reach to every port of the world safe and sound.
Lumei factory has its own design mold for the upvc profiles .Our casement and sliding Europ mold design very popular in home market and over the world market .We also accept your customized size for the mold .
The upvc windows making house :
we have our own machine to make the upvc windows and doors .Also the laminated machine to make upvc window with laminated film our side .All our pvc windows with CE certificate:
Welcome contact here ,we will try to support you in China market .Factory price with good quality.
Product Categories : UPVC Windows > Coloured UPVC Windows